Tree Stands for Artificial Trees.
The metal stand for artificial trees have a 38 inch leg span and ideally holds Christmas trees 9 feet tall and taller with a standard 1.25 inch diameter center pole. They are painted black and made to last years to come with no assembly required. If placed on a hard surface, place a piece of cloth underneath to protect the heavy duty stand and avoid dragging them can cause the paint to chip. Simply unfold these easy to use stand's and place the wing screw into the only hole provided, only placing it far enough to prevent it from folding up again. Before placing the tree trunk in the whole, make sure the screw is not in the way. Have the trees pole all the way against one side and then tighten the screw as far as it can go for best results. After the tree is all set up and decorated to see if it has loosened. Complete instructions are included. Tree Stand Dimensions: Tree Stand Dimensions: Height = 11.5 in; Diameter = 38in; Width of Wide legs = 10in ? 1.5in; Width of Slim legs = 8in ? 1.5in; Diameter of Pole (needed) = 1.25in; Minimum Pole Length (under tree) ? 5.5in; Above ground - 1in.